DIY: Installing TPMS on your aftermarket wheels.
#1
DIY: Installing TPMS on your aftermarket wheels.
Use this guide at your own risk. i'm not responsible for anything.
1) buy make a clamp kit.- stock # 4002 http://www.breezeclamps.com/makeaclamp.htm
cut to length
2) buy sheathing clips from home depot (picture 1)
bend it like in picture 1
3)route the band through the clip as show in picture 2
4) put on the tpms by discarding the valve cap and unscrewing the body cap, put the tip through the clip, and screw the body cap back on to secure as shown in picture 3
5) strap the tpms at the dip of the wheels as close as possible towards the center of the wheel on the inside as show in picture 4
optional- you can use double sided tape on the underside of the clamp all around the wheel as a "just in case" insurance.
done
1) buy make a clamp kit.- stock # 4002 http://www.breezeclamps.com/makeaclamp.htm
cut to length
2) buy sheathing clips from home depot (picture 1)
bend it like in picture 1
3)route the band through the clip as show in picture 2
4) put on the tpms by discarding the valve cap and unscrewing the body cap, put the tip through the clip, and screw the body cap back on to secure as shown in picture 3
5) strap the tpms at the dip of the wheels as close as possible towards the center of the wheel on the inside as show in picture 4
optional- you can use double sided tape on the underside of the clamp all around the wheel as a "just in case" insurance.
done
Last edited by accordfreak; 10-30-2007 at 03:34 AM.
#7
Trending Topics
#11
#12
#14
#15
Originally Posted by accordfreak
ocg35- sorry i tried to look at the local hardware stores but couldn't find any. you probably have to look at those specialty hardware stores. my extra kit was sold awhile back.